Klipper configs files

Klipeer/biqu-microprobe.cfg

@@ -0,0 +1,57 @@
+[output_pin probe_enable]
+pin: gpio29 # The control IO on the SKR 3 is PE5
+value: 0 # Probe default retracted
+
+[gcode_macro Probe_Deploy]
+gcode:
+  SET_PIN PIN=probe_enable VALUE=1
+
+[gcode_macro Probe_Stow]
+gcode:
+  SET_PIN PIN=probe_enable VALUE=0
+
+[probe]
+pin: ^!gpio22 # The detection IO on the SKR 3 is PC13, V1 should be ^PC13
+deactivate_on_each_sample: False
+x_offset: -26.0 # Actual installed offset of MicroProbe
+y_offset: -26.5 # Actual installed offset of MicroProbe
+z_offset: -1.250 # Actual installed offset of MicroProbe
+speed: 5.0
+activate_gcode:
+  Probe_Deploy
+  G4 P500
+deactivate_gcode:
+  Probe_Stow
+
+[bed_mesh]
+speed: 300
+horizontal_move_z: 10
+
+mesh_min: 27,27
+mesh_max: 198,198
+
+
+fade_start: 0.6
+fade_end: 10.0
+probe_count: 5,5
+algorithm: bicubic
+
+[screws_tilt_adjust]
+screw1: 138.00,138.5
+screw1_name: Central screw
+screw2: 53.00,53.50
+screw3_name: Front left screw
+screw3: 53.00,224.50
+screw3_name: Rear left screw
+screw4: 224.00,53.50
+screw4_name: Front right screw
+screw5: 224.00,224.50
+screw5_name: Rear right screw
+speed: 150
+screw_thread: CW-M3
+
+[axis_twist_compensation]
+speed: 50
+calibrate_start_x: 20
+calibrate_end_x: 200
+calibrate_y: 112.5