[output_pin probe_enable]
pin: gpio29 # The control IO on the SKR 3 is PE5
value: 0 # Probe default retracted

[gcode_macro Probe_Deploy]
gcode:
  SET_PIN PIN=probe_enable VALUE=1

[gcode_macro Probe_Stow]
gcode:
  SET_PIN PIN=probe_enable VALUE=0

[probe]
pin: ^!gpio22 # The detection IO on the SKR 3 is PC13, V1 should be ^PC13
deactivate_on_each_sample: False
x_offset: -26.0 # Actual installed offset of MicroProbe
y_offset: -26.5 # Actual installed offset of MicroProbe
z_offset: -1.250 # Actual installed offset of MicroProbe
speed: 5.0
activate_gcode:
  Probe_Deploy
  G4 P500
deactivate_gcode:
  Probe_Stow

[bed_mesh]
speed: 300
horizontal_move_z: 10

mesh_min: 27,27
mesh_max: 198,198


fade_start: 0.6
fade_end: 10.0
probe_count: 5,5
algorithm: bicubic

[screws_tilt_adjust]
screw1: 138.00,138.5
screw1_name: Central screw
screw2: 53.00,53.50
screw3_name: Front left screw
screw3: 53.00,224.50
screw3_name: Rear left screw
screw4: 224.00,53.50
screw4_name: Front right screw
screw5: 224.00,224.50
screw5_name: Rear right screw
speed: 150
screw_thread: CW-M3

[axis_twist_compensation]
speed: 50
calibrate_start_x: 20
calibrate_end_x: 200
calibrate_y: 112.5