[force_move] 
enable_force_move: true 

[gcode_macro HOME_X]
gcode:
  SET_TMC_CURRENT STEPPER=stepper_x CURRENT=0.5
  G28 X
  G0 X{225/ 2} F9000
  SET_TMC_CURRENT STEPPER=stepper_x CURRENT={printer.configfile.config["tmc2209 stepper_x"].run_current}

[gcode_macro HOME_Y]
gcode:
  SET_TMC_CURRENT STEPPER=stepper_y CURRENT=0.5
  G28 Y
  G0 Y{225 / 2} F9000
  SET_TMC_CURRENT STEPPER=stepper_y CURRENT={printer.configfile.config["tmc2209 stepper_x"].run_current}

[gcode_macro HOME_Z]
gcode:
  {% set PROBE_X_OFFSET = 26.00 %}
  {% set PROBE_Y_OFFSET = 26.50 %}
  G0 X{( 225 / 2 ) + PROBE_X_OFFSET } F9000
  G0 Y{( 225 / 2 ) + PROBE_Y_OFFSET } F9000
  G28 Z
  G0 Z10 F600
  G0 Y{225 / 2} F9000
  G0 X{225 / 2} F9000
  M204 S{printer.configfile.config.printer.max_accel}
  
[gcode_macro HOME_Z_homed]
gcode:
  HOME_X
  HOME_Y
  HOME_Z

[homing_override]
axes: xyz
gcode:

  {% set x_homed = 'x' in printer.toolhead.homed_axes %}
  {% set y_homed = 'y' in printer.toolhead.homed_axes %}
  {% set z_homed = 'z' in printer.toolhead.homed_axes %}
  {% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}
  {% set current_z = printer.toolhead.position.z %}
  
  {% if not z_homed or home_all %}
    SET_KINEMATIC_POSITION Z=0
    G91
    G1 Z10 F300
  {% endif %}

    
  M400
  G90
  M204 S1000

  {% if current_z < 10 %}
    G0 Z10 F600
  {% endif %}

  {% if home_all or not z_homed %}
    HOME_Z_homed
  {% endif %}

  {% if 'Y' in params and 'X' in params %}
    HOME_X
    HOME_Y
  {% endif %}

  {% if 'Y' in params %}
    HOME_Y
  {% endif %}
  
  {% if 'X' in params %}
    HOME_X
  {% endif %}

  {% if 'Z' in params %}
    HOME_Z
  {% endif %}